Scully Intellicheck Control Monitor - Overfill Prevention System - 09109, 08832
Scully's IntelliCheck System
is the most advanced secondary overfill
protection and retained product monitoring
system in tank truck loading operations.
Featuring Dynacheck automatic and
continuous self-checking circuitry,
the controller, wiring, connections and
sensors are checked for faults up to
30 times per second. Only IntelliCheck
offers system diagnostics this extensive.
IntelliCheck is a state of the art point level detection system that provides:
- Overfill prevention and retained product
monitoring in one compact enclosure.
- Scully Dynacheck automatic and
continuous self-checking circuitry.
- The ability to use existing Scully five-wire
optic or Scully two-wire optic overfill
- Complete visual and diagnostic display
of overfill sensors status.
- Will not permit
loading under any fault or wet overfill
- Monitoring of up to 8 compartments.
- Complete compatibility with all Scully loading
rack overfill prevention equipment.
- Durable construction for long lasting
- Easy installation with step by step instructions.
- The best technical service in the industry, with
24-hour toll-free trouble-shooting and technical
- Full communication with diagnostic information
on all sensor conditions and system functions
shown and explained on the monitor cover.
Monitoring of up to
- Maximum safety with
and continuous self-checking
- Red wet sensor LED
indicators which illuminate
on high level and signal
- RETAINED PRODUCT
Automatic detection with
two-wire optic retained
product sensors. Loading is automatically
locked out when product
remains in a compartment.
Driver must acknowledge
the presence of retained
Warns against product
- ADVANCED OPTIC SENSING
Scully optic sensors are the
devices through which
Dynacheck detects the
presence of liquid product.
The signal for each sensor
is directly wired to the
IntelliCheck monitor for
verification of each
Optic technology insures no
One overfill and/or one
retained product sensor is
mounted in each compartment.
- DYNACHECK SAFETY
Dynacheck uses pulsed signals
to continuously check the
The controller, wiring, connections and sensors are checked
for faults up to 30 times per
If a sensor comes in contact
with liquid, or in the event of a
system fault, the pulsed signals
cease, and the controller automatically signals for immediate
shutdown of the loading
- COMPLETE DIAGNOSTICS
IntelliCheck shows visual
indication of proper operation.
Prominent red and green
status LED indicators indicate
permit, Dynacheck status,
auxiliary control, signals from
rack, and signals to rack.
Individual wet sensor
detection by compartment,
with indication of open sensor
wiring, shorted sensor wiring,
sensor faults and even wiring
faults or a faulty connection
to the loading rack controller.
Scully sockets are the vehicle
mounted connectors for the
Feature lightweight vinyl
protective caps to prevent
Captive cable attachment to